ASLAN WrapTheStreet - DFP46
Item No.
DADFP46
ASLAN DFP 46 Self-adhesive digital printing film for floor graphics applications, perfect for temporary advertising on rough outdoor surfaces such as asphalt. The film is to be used in conjunction with the floor graphics protective laminates FloorProtect ASLAN MP 326 or Premium FloorProtect ASLAN MP
Description
ASLAN DFP 46 Self-adhesive digital printing film for floor graphics applications, perfect for temporary advertising on rough outdoor surfaces such as asphalt.
The film is to be used in conjunction with the floor graphics protective laminates FloorProtect ASLAN MP 326 or Premium FloorProtect ASLAN MP 300.
Once printed and laminated, WrapTheStreet ASLAN DFP 46 is fire-rated according to DIN EN-13501-1.
Thanks to its special adhesive technology, it adheres very well to rough outdoor surfaces when applied with heat.
After use, it can be removed quickly and easily.
Face film: Plasticized PVC (monomeric softeners)
Thickness: ~ 80 μm
Adhesive: Acrylic pressure sensitive adhesive
Release liner: PE coated silicone cardboard
Printability
The material is printable with solvent, eco-solvent, UV-curable and latex inks as well as with screenprinting inks.
To protect the print from mechanical wear and to increase the slip resistance, the print must be protected with an ASLAN floor graphics laminating film
(Premium FloorProtect ASLAN MP 300 or Outdoor FloorProtect ASLAN MP 326). Before laminating the inks must have dried out completely.
Therefore it should dry for at least 48 hours. The floor graphics laminating film must be applied without overlapping
Application
The surface the film is to be applied on must be dry, clean and free of grease. The size of
a single motive must be at least 0.5 m². The film is only suitable for applications on rough
surfaces and has to be applied with a heat gun and the ASLAN ApplicationRoll completely
into the surface. The surface must have a temperature of at least 12 °C. The temperature
must not drop significantly within the next 72 hours and it has to stay dry in order that the
final adhesive strength is reached. To prevent that the film peels off at the edges rounded
corners are recommended. In depressions the durability may be limited as water
accumulates in these areas. Due to the wide variety of possible surfaces own live tests
are mandatory. High load might destroy or detach the film. Humidity reduces the
adhesive strength significantly. As most surfaces are breathable water regularly gets
between film and surface. The film must not be applied onto smooth and polished
surfaces because the adhesive strength will increase significantly and removability
cannot be guaranteed
Removability
WrapTheStreet ASLAN DFP 46 can be removed without problems and in one piece for up
to six months. The film has to be removed slowly and carefully.
Storage life
Before application, the films can be stored for minimum 2 years from date of production.
The film must be stored at room temperature (15-25 °C) and a relative humidity of the air
of 50-60 %. To avoid pressure points appearing on the roll surface, we recommend the
rolls be stored either vertical standing or for this purpose designed `hanging´ racks.
Gloss:
There can be matt areas on the surface of the high glossy film near the core of the roll.
The film is to be used in conjunction with the floor graphics protective laminates FloorProtect ASLAN MP 326 or Premium FloorProtect ASLAN MP 300.
Once printed and laminated, WrapTheStreet ASLAN DFP 46 is fire-rated according to DIN EN-13501-1.
Thanks to its special adhesive technology, it adheres very well to rough outdoor surfaces when applied with heat.
After use, it can be removed quickly and easily.
Face film: Plasticized PVC (monomeric softeners)
Thickness: ~ 80 μm
Adhesive: Acrylic pressure sensitive adhesive
Release liner: PE coated silicone cardboard
Printability
The material is printable with solvent, eco-solvent, UV-curable and latex inks as well as with screenprinting inks.
To protect the print from mechanical wear and to increase the slip resistance, the print must be protected with an ASLAN floor graphics laminating film
(Premium FloorProtect ASLAN MP 300 or Outdoor FloorProtect ASLAN MP 326). Before laminating the inks must have dried out completely.
Therefore it should dry for at least 48 hours. The floor graphics laminating film must be applied without overlapping
Application
The surface the film is to be applied on must be dry, clean and free of grease. The size of
a single motive must be at least 0.5 m². The film is only suitable for applications on rough
surfaces and has to be applied with a heat gun and the ASLAN ApplicationRoll completely
into the surface. The surface must have a temperature of at least 12 °C. The temperature
must not drop significantly within the next 72 hours and it has to stay dry in order that the
final adhesive strength is reached. To prevent that the film peels off at the edges rounded
corners are recommended. In depressions the durability may be limited as water
accumulates in these areas. Due to the wide variety of possible surfaces own live tests
are mandatory. High load might destroy or detach the film. Humidity reduces the
adhesive strength significantly. As most surfaces are breathable water regularly gets
between film and surface. The film must not be applied onto smooth and polished
surfaces because the adhesive strength will increase significantly and removability
cannot be guaranteed
Removability
WrapTheStreet ASLAN DFP 46 can be removed without problems and in one piece for up
to six months. The film has to be removed slowly and carefully.
Storage life
Before application, the films can be stored for minimum 2 years from date of production.
The film must be stored at room temperature (15-25 °C) and a relative humidity of the air
of 50-60 %. To avoid pressure points appearing on the roll surface, we recommend the
rolls be stored either vertical standing or for this purpose designed `hanging´ racks.
Gloss:
There can be matt areas on the surface of the high glossy film near the core of the roll.
Attachments
