ASLAN CA23 - METAL EFFECT
Item No.
VACA23
ASLAN CA23 - Metal-Effect film has the same colour effect on both sides and therefore is ideal for applications on glass surfaces. It can be used for indoor and outdoor applications. - Polyester with metallized coating - 50 Microns - Pressure sensitive polyacrylate adhesive - Silicon paper release
Description
ASLAN CA23 - Metal-Effect film has the same colour effect on both sides and therefore is ideal for applications on glass surfaces. It can be used for indoor and outdoor applications.
- Polyester with metallized coating
- 50 Microns
- Pressure sensitive polyacrylate adhesive
- Silicon paper release liner
- 2 Year Durability (EU)
- 1250mm wide
- Available by the meter
- Rolls are 25m
-Digital cutting:
The self-adhesive film is ideally suited for cutting. The vertical height of capital letters should
not be smaller than 10 mm.
- Printability: The material can be printed with silk-screen printing inks.
- Application: In general the film can be applied dry. A wet application reduce static and helps repositioning. Being a PET base film water can’t diffuse through the film. Therefore all water used has to be squeegeed out during application.
For the application of letterings etc. we recommend our ASLAN Application Tapes.
- Storage:
Before application the films can be stored up to 2 years from date of production. The filmmust be stored at room temperature (15-25 °C / 59-77 °F) and a relative humidity of the air of 50-60%. To avoid pressure points appearing on the roll surface, we recommend the rolls be
stored either vertical standing or for this purpose designed `hanging ́ racks.
- Polyester with metallized coating
- 50 Microns
- Pressure sensitive polyacrylate adhesive
- Silicon paper release liner
- 2 Year Durability (EU)
- 1250mm wide
- Available by the meter
- Rolls are 25m
-Digital cutting:
The self-adhesive film is ideally suited for cutting. The vertical height of capital letters should
not be smaller than 10 mm.
- Printability: The material can be printed with silk-screen printing inks.
- Application: In general the film can be applied dry. A wet application reduce static and helps repositioning. Being a PET base film water can’t diffuse through the film. Therefore all water used has to be squeegeed out during application.
For the application of letterings etc. we recommend our ASLAN Application Tapes.
- Storage:
Before application the films can be stored up to 2 years from date of production. The filmmust be stored at room temperature (15-25 °C / 59-77 °F) and a relative humidity of the air of 50-60%. To avoid pressure points appearing on the roll surface, we recommend the rolls be
stored either vertical standing or for this purpose designed `hanging ́ racks.
Attachments
