ASLAN CA30 - Digital Metal Effect
Item No.
AME
The self-adhesive metal effect media, designed for outdoor durability is suitable for cutting plotters and also digitally printable with solvent, eco solvent, latex, UV-curable inks and screen printing. The film has the same colour effect on both sides and therefore is ideal for applications on
Description
The self-adhesive metal effect media, designed for outdoor durability is suitable for cutting plotters and also digitally printable with solvent, eco solvent, latex, UV-curable inks and screen printing. The film has the same colour effect on both sides and therefore is ideal for applications on glass surfaces.
- Thickness: 140 micron.
- Maximum Service Life: Up to 5 years. Service year life based off European, vertical conditions and colour dependant
- Adhesive: pressure sensitive polyacrylate
- Release liner: silicon paper
- Digital cutting: The self-adhesive film is ideally suited for cutting. The vertical height of capital letters should not be smaller than 10 mm.
- Printability: The material can be printed with silk-screen printing inks.
- Application: In general the film can be applied dry. A wet application reduce static and helps repositioning. Being a PET base film water can’t diffuse through the film. Therefore all water used has to be squeegeed out during application. For the application of letterings etc. we recommend our ASLAN Application Tapes.
- Storage: Before application the films can be stored up to 2 years from date of production. The film must be stored at room temperature (15-25 °C / 59-77 °F) and a relative humidity of the air of 50-60%. To avoid pressure points appearing on the roll surface, we recommend the rolls be stored either vertical standing or for this purpose designed hanging ́ racks
- Thickness: 140 micron.
- Maximum Service Life: Up to 5 years. Service year life based off European, vertical conditions and colour dependant
- Adhesive: pressure sensitive polyacrylate
- Release liner: silicon paper
- Digital cutting: The self-adhesive film is ideally suited for cutting. The vertical height of capital letters should not be smaller than 10 mm.
- Printability: The material can be printed with silk-screen printing inks.
- Application: In general the film can be applied dry. A wet application reduce static and helps repositioning. Being a PET base film water can’t diffuse through the film. Therefore all water used has to be squeegeed out during application. For the application of letterings etc. we recommend our ASLAN Application Tapes.
- Storage: Before application the films can be stored up to 2 years from date of production. The film must be stored at room temperature (15-25 °C / 59-77 °F) and a relative humidity of the air of 50-60%. To avoid pressure points appearing on the roll surface, we recommend the rolls be stored either vertical standing or for this purpose designed hanging ́ racks
Attachments
