ASLAN WrapTheCarpet - DFP49
Item No.
DADFP49
ASLAN DFP 49 WrapTheCarpet is a self-adhesive digital printing film is specially designed for short-term floor graphics applications and on low-pile carpets and is still easily removable after short term application. To be used in conjunction with the floor graphics protective laminates
Description
ASLAN DFP 49 WrapTheCarpet is a self-adhesive digital printing film is specially designed for short-term floor graphics applications and on low-pile carpets and is still easily removable after short term application.
To be used in conjunction with the floor graphics protective laminates FloorProtect ASLAN MP 326 or Premium FloorProtect ASLAN MP 300.
Once printed and laminated, WrapTheStreet ASLAN DFP 46 is fire-rated according to DIN EN-13501-1.
The film is perfectly suitable for the use at exhibitions, at the point of sale etc.
Face film: Plasticized PVC (monomeric softeners)
Thickness: ~ 150 μm
Adhesive: Acrylic pressure sensitive adhesive
Release liner: PE coated silicone cardboard
Printability
The material is printable with solvent, eco-solvent, UV-curable and latex inks as well as
with screen printing inks.
To protect the print from mechanical wear and to increase the slip resistance, the print
must be protected with an ASLAN floor graphics laminating film. Before laminating, the
inks must have dried out for at least 48 hours.
Application
The floor graphics laminating film must be applied without overlapping.
The surface should have a temperature of at least 10-15 ° C, should be dry and firm and
the temperature should not drop much within the next 72 hours.
The surface onto which the film is to be applied must be free of dust, dirt and grease.
To prevent the film from coming apart at the edges, rounded corners and simple
shapes are recommended. The vinyl needs a large surface space to ensure there is a
high adhesion strength to the carpet.
Due to the wide variety of possible carpet qualities we recommend a test application
onto the desired surface where not visible!
Removability
WrapTheCarpet ASLAN DFP 49 can be removed in one piece without problems and
without damaging the carpet. The film must be removed slowly and carefully.
Storage life
Before application, the films can be stored for minimum 2 years from date of production.
The film must be stored at room temperature (15-25 °C) and a relative humidity of the air
of 50-60 %. To avoid pressure points appearing on the roll surface, we recommend the
rolls be stored either vertical standing or for this purpose designed `hanging´ racks.
Gloss:
There can be matt areas on the surface of the high glossy film near the core of the roll.
These can be caused by the rear of the backing paper, but will disappear after a short
period of time and don’t influence the print results.
To be used in conjunction with the floor graphics protective laminates FloorProtect ASLAN MP 326 or Premium FloorProtect ASLAN MP 300.
Once printed and laminated, WrapTheStreet ASLAN DFP 46 is fire-rated according to DIN EN-13501-1.
The film is perfectly suitable for the use at exhibitions, at the point of sale etc.
Face film: Plasticized PVC (monomeric softeners)
Thickness: ~ 150 μm
Adhesive: Acrylic pressure sensitive adhesive
Release liner: PE coated silicone cardboard
Printability
The material is printable with solvent, eco-solvent, UV-curable and latex inks as well as
with screen printing inks.
To protect the print from mechanical wear and to increase the slip resistance, the print
must be protected with an ASLAN floor graphics laminating film. Before laminating, the
inks must have dried out for at least 48 hours.
Application
The floor graphics laminating film must be applied without overlapping.
The surface should have a temperature of at least 10-15 ° C, should be dry and firm and
the temperature should not drop much within the next 72 hours.
The surface onto which the film is to be applied must be free of dust, dirt and grease.
To prevent the film from coming apart at the edges, rounded corners and simple
shapes are recommended. The vinyl needs a large surface space to ensure there is a
high adhesion strength to the carpet.
Due to the wide variety of possible carpet qualities we recommend a test application
onto the desired surface where not visible!
Removability
WrapTheCarpet ASLAN DFP 49 can be removed in one piece without problems and
without damaging the carpet. The film must be removed slowly and carefully.
Storage life
Before application, the films can be stored for minimum 2 years from date of production.
The film must be stored at room temperature (15-25 °C) and a relative humidity of the air
of 50-60 %. To avoid pressure points appearing on the roll surface, we recommend the
rolls be stored either vertical standing or for this purpose designed `hanging´ racks.
Gloss:
There can be matt areas on the surface of the high glossy film near the core of the roll.
These can be caused by the rear of the backing paper, but will disappear after a short
period of time and don’t influence the print results.
Attachments
FUSION LITE Bannerstand
Item No.
DTLITE
