A turbo-adhesive, sublimation-resistant, printable polyurethane film with a white block out interlayer, suitable for both bright and dark textiles. Compatible with eco-solvent, solvent, and latex printers, it allows high-resolution designs with excellent colour vibrancy. The non-adhesive PET liner enables precise cutting of even filigree motifs using CAD/CAM plotters. Designed with a soft textile touch, it offers excellent cutting and weeding properties. After thermal transfer, a semi-matt finish is achieved, and the PET liner should be removed after cooling to room temperature. For best results, avoid preheating garments to prevent sublimation migration.
- Thickness: 120
- Finish: Semi-matt, soft textile touch
- Application: Cotton, Polyester/Cotton blends, Polyester/Acrylic
- Adhesive Colour: Turbo adhesive (white block out layer)
- Colours: White
- Opacity: High opacity with sublimation block out
- Backing Liner: Non-adhesive PET carrier (removable after cooling)
- Film Type: Polyurethane (PU), printable with block out interlayer
- Not Suitable For: Heat-sensitive textiles
- Application Instructions: Print using eco-solvent, solvent, or latex inks. Cut and weed using CAD/CAM plotters. Apply with heat press without preheating the garment. Remove PET-liner after cooling to room temperature. Wash up to 60°C inside-out. Tumble dry at low temperature. Do not dry clean or bleach. See Technical Data Sheet for recommended temperature, time, and pressure settings.