A casted polyurethane transfer film designed for plotter cutting, featuring a high-quality matt surface and a striking 3D effect due to its 600 micron thickness. Ideal for bold designs, it delivers visually impactful results on a wide range of textiles. Made from ecologically inert raw materials, it contains no PVC, plasticisers, or heavy metals -ensuring a safe and long-lasting bond when applied under recommended conditions. Perfect for T-shirts, sportswear, leisurewear, bags, and promotional textiles. - Thickness: 600 micron - Finish: Matt, 3D surface effect - Application: Cotton, Polyester/Cotton blends, Polyester/Acrylic - Adhesive Colour: Transparent - Colours: Refer to official colour charts for available variants - Opacity: Opaque - Backing Liner: Non-adhesive PET carrier - Film Type: Casted Polyurethane (PU) with hotmelt adhesive - Not Suitable For: Nylon or hydrophobic textiles — use POLI-FLEX® NYLON instead - Application Instructions: Cut with a 60° Flock knife and cut the motif twice. Due to the thickness of the material it is recommended to only cut and weed medium-to-large designs only. Apply with cold peel. Wash up to 60°C inside-out. Tumble dry at low temperature. Do not dry clean or bleach. For best results, test on material first and follow the specified temperature, time, and pressure settings as outlined in the Technical Data Sheet.