SISER S-PRINT
Item No.
DHTSSPrint
S-Print Is a thin water-based material which allows for low temperature application and a soft touch on your garment. The Oeko-tex and VEGANOK certified film (HTV) can be applied with as little as 120 degrees for 5 to10 seconds (depending on material weight). Compatible with CAD cutters, simply
Description
S-Print Is a thin water-based material which allows for low temperature application and a soft touch on your garment. The Oeko-tex and VEGANOK certified film (HTV) can be applied with as little as 120 degrees for 5 to10 seconds (depending on material weight). Compatible with CAD cutters, simply print your design using eco-solvent, solvent or UV based ink to create a quality garment in minutes.
Specifications
• Adhesive Colour - Clear
• Backing Liner - Polyester
• Film Paper Type - Polyurethane PU
• Finish - Satin
• Technology - Heat Transfer
• Print Method - Latex, Solvent, Eco Solvent
Features
• 85 micron PU
• Soft touch
• Low transfer temperature
• Short transfer time
Applications
• Cotton
• Polyester
• Poly/Cotton blends
• Spandex
• Washing: Wait 24hrs before washing, Up to 60 degree washability - inside-out, OK to tumble dry, Do not dry clean, No bleach or aggressive chemicals
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 120°C for 5 seconds if textile is lighter than 160 g/m2 or 150°C for 10 seconds if textile is heavier than 160 g/m2
4. Use medium pressure for 25 seconds
5. Peel Carrier hot
Specifications
• Adhesive Colour - Clear
• Backing Liner - Polyester
• Film Paper Type - Polyurethane PU
• Finish - Satin
• Technology - Heat Transfer
• Print Method - Latex, Solvent, Eco Solvent
Features
• 85 micron PU
• Soft touch
• Low transfer temperature
• Short transfer time
Applications
• Cotton
• Polyester
• Poly/Cotton blends
• Spandex
• Washing: Wait 24hrs before washing, Up to 60 degree washability - inside-out, OK to tumble dry, Do not dry clean, No bleach or aggressive chemicals
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 120°C for 5 seconds if textile is lighter than 160 g/m2 or 150°C for 10 seconds if textile is heavier than 160 g/m2
4. Use medium pressure for 25 seconds
5. Peel Carrier hot
Attachments
